Reading Your phones Unlock
Codes
1. Run the Server Client
software
2. Enter your User name & Password
(supplied upon
purchase)
3. Remove Treo Battery Cover &
Power on your Treo
4. Connect USB Sync Cable (as
supplied with phone)
5. Place Phone in “Test Mode”
- Press and Hold Button on USB Cable
-
Using Pen Press and hold for 1 second Reset button in Back of
Treo
- Release reset button, then release Active
Sync button on Cable
- Display should be red/blue
etc and detail boot loader version
- Phone is now
in Test Mode
If Windows now detects a new device (this
will happen the first time you put a treo 650 into test mode, then
you will need to do the following
(you will only need to do
this once)
| |
|
1. |
A new
hardware wizard will appear. Select “No, not this
time” if asked about connecting to the
internet |
|
2. |
Then on
the next screen Select “Don’t search, I will
choose driver to install.” Click on the “Have Disc
… “ button |
|
3. |
Select the
drivers, direct windows to the folder containing
the Treo HTTC drivers, if presented with
a Windows warning about Microsoft signing of
drivers. Choose “Continue Anyway”
|
|
4. |
Windows
will now install the drivers.
|
|
5. |
Click on
finish on next screen |
|
6. |
Windows has finished
installing New Hardware |
|
|
You will only need to do
this once per
PC. | | |
|
6. Now click “Execute” on
client SW, (codes should be displayed in under 5 Seconds)
7. Do not closer browser as codes will be lost and you
will need to purchase another log to read codes again!
Entering Codes
1. Remove Treo battery, unplug cable
2.
Insert incorrect SIM card (1 the phone does not accept)
3. Power on Treo-650, “Sim not allowed” is displayed,
click “ok”
4. Go to the dial pad, and use the stylus
to enter code #1 exactly as displayed in the server client.
Then press “Dial”
5. Phone will reset and display
“sim lock removed”
Phone Unlocked
!!!!